If you have never put up plasterboard, then you may find yourself at a loss. There are many guides on the web, but some of them take you into several different steps and get people quite confused. If you just want to know the basics when it comes to putting up your plasterboard, then you have come to the right place. We can help you to cut it right and ensure that it adheres to the wall correctly. Just follow these steps.
Cutting Your Plasterboard Properly
The first step involves cutting your plasterboard. To do this, you will want to make sure that you measure the space in which you want to put the boards. If you don’t do this, then you may not get it cut just right. You will then want to use a straight edge and a sharp knife to help you cut the boards precisely. While it may not go all the way through, you can usually get it to break off once the edge has been perforated a bit. After it is cut, move on to the next step.
Applying the Plasterboard Adhesive
Next, we will work on applying the plasterboard adhesive. Start out by mixing it according to the directions and then putting it onto the wall in small lumps. You will want to make sure that you space these lumps of adhesive out, approximately a foot from each other. You don’t have to aim for perfection because no one will really see this. Then, you will want to dab it out and make it smooth on the walls. Don’t make it too thin, or you will find that bonding the board is challenging for you. After you finish dabbing it out, move on to the next step.
Bonding the Plasterboard to the Walls
Finally, you will bond your plasterboard to the walls. You will do this by moving the board into the correct position and holding it there for a moment. The adhesive should stick to the boards and make it stay there. You will then need to let it dry, but make sure that you get the boards even because once it dries, it will be impossible for you to move it later. It isn’t as easy as it looks or as it sounds. Just remember that you have to work with precision and detail in mind.
Can You Do It Yourself, or Should You Hire a Pro?
As you can see, there are a variety of different steps involved in putting up plasterboard. The key is to make sure that you do it the right way, and if you are just getting started, there is a lot of room for error. You are sure to mess up a few times, and if you can’t afford to do so- then you may want to hire a professional to put up your plasterboard for you. This will help to ensure that it is done right the first time around and can even be more cost-effective at times!
Putting up plasterboard isn’t the easiest of tasks in the world. This article outlines the main steps for doing so whilst also exploring the benefits of having a professional do it for you. Visit Selco Builders Warehouse for more information.