Drywall installation is not an incredibly challenging job for most. But drywall boards are generally extremely long and heavy, which makes the process of installing drywall difficult for just one person. While having a helping hand is simple and convenient, however, it may be challenging to locate someone who can help with the task, particularly if you wish to finish the work within a particular date or at a specific time.
If you’re left by yourself on the day of your job, don’t worry. Drywall is able to be put up by just one person. However, it isn’t easy to complete the task without causing injury. Here are some suggestions for a seamless installation.
Hire a Drywall Lift
It’s true that renting a drywall lift requires the expenditure of some cash; however, many drywallers advocate this method and state that it’s worth the price. The drywall lift can be helpful to lift up drywall to allow it to be hung on the ceiling. However, it is also beneficial for walls too. Simply tilt the lift and adjust it until it fits 12 or 8-foot pieces. You can lease a drywall lift at Home Depot and other home improvement stores at less than $100 per day. It’s safer than injuring your back.
Get a Panel Roller
If you’re working on a big task, it could become difficult for you to transport hundreds of panel drywalls from one location to the next. Panel rollers can hold two panels at the same time and are simple to operate. You can run the panel roller using your hand and carry sheet drywall that is tucked away under the arm. It is available at the local home improvement retailer.
Make use of a lever
If you’re installing drywall on lower walls, it is possible to be enticed to pull the wall for the panels to stay from the surface. Instead, utilize the pry bar or wooden block as levers. You can then use the power of your feet to ensure a secure fit against the upper surface.
Make Use of your Head (Literally)
When nailing the drywall to ceilings, utilize your head as support. Set the nails while sitting on the ground. After that, lift the sheet and hold it up with your head and then drive the nails.
Cut Loose
If you are working on your own, You must save any time that you can. Make measurements as loose as possible by subtracting 1/4 inch from your measurements. It is better to use panels that are shorter rather than too long, as it is possible to make use of joint compounds to fill the gaps. In the event that your panels’ dimensions are big, you might be able to use joint compound; however, it’s likely to be a challenge. It will be necessary to remove the board and cut it back.
You’re Not Alone
If you’re looking to start the installation of drywall or insulation, make sure you know you have an advocate at 1-800-Drywall. We are serious about our work and, as one of Canada’s most trusted online drywall providers, We strive to make sure that you are getting the best price that you can get. Need help in estimating the materials you need? Use our convenient online calculator. We can also be reached by phone at (800) 379-9255.