1.) Verify that they are working without any automation
A gate that is to be automated should function properly as a manual gate. The addition of automation equipment won’t solve the issues with a poorly installed gate.
2.) Gates that are installed on slopes create problems
Beware of installing gates in areas that go upwards. This could cause problems and require more equipment, and strain the automation. It is possible to do it. However, it’s better to avoid it as much as you can.
3.) Are gate openers adequate for the job?
Be sure that the product selected is compatible and meets the specifications set forth by the company. In the event of a failure to meet this, it will cause the warranty to be invalidated.
4.) Water and motors in the underground
When installing underground motors, ensure that adequate drainage is available. These motors are designed to be used underground, not underwater.
Definitions
IP67 is the term used to describe a product that is not a threat to the unit in the event that it is submerged to 15cm submerged for up to 30 minutes.
The ingress of water in a harmful amount should not be allowed in an enclosure that is submerged in water in a specified amount of pressure and duration (up to 1m submersions)
Test duration: 30 minutes
Immersion in 1 m or more was measured at the bottom of the device, and at least 15cm was calculated from the top of the device.
5.) A professional installation is required.
Gate automation equipment must be purchased from and installed by a certified installer. It could cost a bit more, but you’ll be able to count on someone to take all responsibility for installation and carry the proper risk assessment in accordance with the law.
It’s tempting to purchase your equipment from a business selling equipment at close to market costs directly to users. The installation of automated gate equipment by someone who is not qualified to be aware of the dangers and safety rules could result in serious injuries that you could be accountable for.
6) Environment conditions
Be aware of environmental conditions, specifically the impact of wind on gates. Even an open railing gate can provide a bit of wind resistance. closed-boarded wooden gates can be precisely like sails when there is a strong wind. 24V systems are typically the best choice due to the inherent safety features included in the system; however, they might struggle to function effectively in highly windy areas.
7) What are the method of gates’ closing and opening controlled?
Automated gates that operate both from the inside and out are required. Understanding the way electric gates are utilized is essential in order to ensure the proper security system for access is used. Common alternatives are Keypads/card access remotes, radio remotes, and push buttons. Ground loops/probes, vehicle detectors, and GSM by mobile phone.
8.) What is the access point for pedestrians and visitors?
If there’s no alternative to a designated pedestrian gate, the visitors require a means to contact the property in order in order to get access.
For access for pedestrians from the outside and without a radio, the keypad could be used to open a single leaf or partially open both leaves, depending on the particular system.
In addition, for access to visitors, entry intercoms are typically utilized.
The most common examples are:
A) hardwired audio or audio/video device (with or without a built-in keypad)
(b) A radio audio device (with keys or with no keypad) offering a range of up to 400m with CLEAR SPACE
C) GSM audio (with or without a keypad) offers unlimited coverage. However, it is dependent on local phone reception.
9) What do you think about trade access?
Be aware of access for tradespeople such as postmen, dustmen, gardeners, etc. This can be accomplished through the use of a button or one of the above ways for accessing a clock that allows the gate to be operated using an insecure method only during certain hours of the day.
10) Do self-locking motors have the capacity to keep gates closed?
It is not possible to depend on a “locking” operator to guarantee complete security for gates. The addition of additional locks can make it difficult to open a gate, and, in the event of extreme circumstances, bollards are installed in the gate’s front or behind to increase security.